PRODUCTS : MARINE SUPPLY : ELECTRICAL : BATTERY CHARGERS

Sub Catalogs

  • This catalog has no sub-catalogs.
  • BEP MARINE DUAL SENSE VOLTAGE SENSITIVE RELAY

    BEP MARINE DUAL SENSE VOLTAGE SENSITIVE RELAY

    • Allows two batteries to be charged at the same time. 
    • Eliminates the possibility of draining the start battery and protects sensitive electronic equipment powered from the house battery from harmful engine start up spikes.
    • Easy 3 wire connection at the battery. 
    • No need to bypass existing alternator wiring. 
    • Compact size - No large heat sink. 
    • 125 amps continuous.

    • Part Number: D700150
  • DUAL PRO RECREATIONAL SERIES BATTERY CHARGER - TWO 6 AMP BANKS

    DUAL PRO RECREATIONAL SERIES BATTERY CHARGER - TWO 6 AMP BANKS

    • 12 AMPS; 12V, 24V. 
    • Affordable, reliable, and safe battery charging system designed for everyday use. 
    • Dependable, rugged construction and waterproof. 
    • Independent outputs and fully automatic. 
    • Universal input: 100-240 VAC 50/60HZ. 
    • Battery maintenance mode. 
    • Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries. 
    • DC charge cables: 5' and AC power cord: 3'. 
    • LED lights indicate the state of charge. 
    • Reverse polarity protected and no installation restrictions. 
    • Ignition protected (US Coast Guard 33 CFR 183.410). 
    • Approved and meets ISO 8846 Marine standards. 
    • FCC 15 Parts A and B Interference Compliant.

    • Part Number: D284596
  • GUEST ON-BOARD BATTERY CHARGER - 10 AMP - 2 BANK

    GUEST ON-BOARD BATTERY CHARGER - 10 AMP - 2 BANK

    • 10 AMP, 12 VOLT, 2 BANK, 120V INPUT
    • All high frequency, digital charging technology.
    • Fully automatic 5-stage performance charging.
    • Dedicated battery charging, sensing and control per bank.
    • Expanded LED charge status monitor.
    • Wiring and battery fault etection.
    • Auto-maintain energy saver mode.
    • Up to 40% lighter.
    • 100% waterproof (IP67) and shock resistant for all fresh and saltwater applications.
    • Pre-wired for easy installation.
    • For all 12 volt flooded and AGM lead acid batteries.
    • Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection.  In-line fuses for maximum DC wire protection.
    • 2 year warranty through GUEST

    • Part Number: D379202
  • GUEST ON-BOARD BATTERY CHARGER - 15 AMP - 3 BANK

    GUEST ON-BOARD BATTERY CHARGER - 15 AMP - 3 BANK

    • 15 AMP, 12 VOLT, 3 BANK, 120V INPUT
    • All high frequency, digital charging technology.
    • Fully automatic 5-stage performance charging.
    • Dedicated battery charging, sensing and control per bank.
    • Expanded LED charge status monitor.
    • Wiring and battery fault etection.
    • Auto-maintain energy saver mode.
    • Up to 40% lighter.
    • 100% waterproof (IP67) and shock resistant for all fresh and saltwater applications.
    • Pre-wired for easy installation.
    • For all 12 volt flooded and AGM lead acid batteries.
    • Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection.  In-line fuses for maximum DC wire protection.
    • 2 year warranty through GUEST

    • Part Number: D379204
  • GUEST ON-BOARD BATTERY CHARGER - 30 AMP - 3 BANK

    GUEST ON-BOARD BATTERY CHARGER - 30 AMP - 3 BANK

    • 30 AMP, 12 VOLT, 3 BANK, 120V INPUT
    • All high frequency, digital charging technology.
    • Fully automatic 5-stage performance charging.
    • Dedicated battery charging, sensing and control per bank.
    • Expanded LED charge status monitor.
    • Wiring and battery fault etection.
    • Auto-maintain energy saver mode.
    • Up to 40% lighter.
    • 100% waterproof (IP67) and shock resistant for all fresh and saltwater applications.
    • Pre-wired for easy installation.
    • For all 12 volt flooded and AGM lead acid batteries.
    • Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection.  In-line fuses for maximum DC wire protection.
    • 2 year warranty through GUEST

    • Part Number: D379206
  • MINN KOTA DIGITAL ON-BOARD BATTERY CHARGER - 10 AMPS

    MINN KOTA DIGITAL ON-BOARD BATTERY CHARGER - 10 AMPS

    • DIMENSIONS: 11-1/2" L x 7-1/2" W x 4" H
    • Digital control.
    • Automatic Multi-Stage Charging - Controls the voltage and current your battery gets throughout the three stages of the charging cycle for a safe precise charge.
    • Automatic Temperature Compensation - Sense outside temperature fluctuations and adjust the charge accordingly, providing a fast, accurate charge.
    • Status Code Display - Color-coded readings on digital on-board chargers display your connection status, state of charge and error codes.
    • True-Rated Output.
    • AC Plug Holder keeps plugs dry, safe and easily accessible.
    • Built tough, with waterproof, shock-resistant and vibration-resistant rugged contruction. Plus, they're saltwater-tested to fully combat corrosion.
    • For use with 12-, 24-, 36- and 48-volt systems with 12V/6 cell batteries that are Flooded/Wet Cell, Maintenance Free or Starved Electrolyte (AGM) only.
    • Three year warranty through MINN KOTA
    • Includes: One pre-wired on-board marine battery charger with one 6' fused output cable and one 6' AC power cord.

    • Part Number: D476792
  • NEWMAR BATTERY CHARGER - 12 V, 14 AMP, 3 BANK

    NEWMAR BATTERY CHARGER - 12 V, 14 AMP, 3 BANK

    • 12 Volt, 14 amp, 85/264V Input. 
    • Remote Indicator Panel, LED's indicate charger output stage. 
    • Button allows manual reinitialization of three stage charge cycle. 
    • Supplied with 25' cable and plug-in connector. 
    • Panel dimensions: 3" H x 4.75" W 
    • The Phase Three series represents a new dimension in charger design and performance, employing smart switching circuitry which puts batteries through the optimum three-step charge process, adapts for gel-cell or lead-acid batteries, features precise voltage compensation for varying battery temperature, is rated for continuous duty and is housed in a rugged stainless steel case. 
    • Phase Three Chargers interact with batteries by regulating both voltage and amperage through each phase of the charging process, depending on battery state of charge, temperature, impedance, duration at high rate, system demand and battery type. 
    • Multi-battery output, charges 3 banks on demand.

    • Part Number: D700370
  • NEWMAR BATTERY CHARGER - 12 V, 25 AMP, 3 BANK

    NEWMAR BATTERY CHARGER - 12 V, 25 AMP, 3 BANK

    • 25 amp 90/132V or 180/264V Input. 
    • Remote Indicator Panel, LED's indicate charger output stage. 
    • Button allows manual reinitialization of three stage charge cycle. 
    • Supplied with 25' cable and plug-in connector. 
    • Panel dimensions: 3" H x 4.75" W
    • The Phase Three series represents a new dimension in charger design and performance, employing smart switching circuitry which puts batteries through the optimum three-step charge process, adapts for gel-cell or lead-acid batteries, features precise voltage compensation for varying battery temperature, is rated for continuous duty and is housed in a rugged stainless steel case. 
    • Phase Three Chargers interact with batteries by regulating both voltage and amperage through each phase of the charging process, depending on battery state of charge, temperature, impedance, duration at high rate, system demand and battery type. 
    • Multi-battery output, charges 3 banks on demand.

    • Part Number: D700373